Table of Contents
Advertisement
Chapter 6 Manuipulating Clips with Thumbnails
5
Names of metadata upload files stored on the SD
memory card are displayed. Select the desired files
using the cursor buttons, and choose YES. Upload
starts.
Uploaded metadata is retained even if the power is
turned off. For confirmation of uploaded data, see [6-
17-4 Confirmation of Metadata Upload].
Clip Meta Data items
Clip Meta Data includes the following items: Underlined
items can be set by reading the metadata upload file on the
SD memory card. Other items are set automatically during
shooting. Using the latest update version of P2 viewer,
metadata upload files can be written to SD memory cards
using a PC. Download the latest update version of P2 viewer
from the following URL and install it to your PC:
http://panasonic.biz/sav/p2
Regarding SD memory cards to be used, see <Cautions in
using SD memory cards> (page 17).
<Note>
The file which was edited by except P2 viewer is displayed
as "UNKNOWN DATA", and may not be read.
GLOBAL CLIP ID:
Displays the global clip ID, which indicates the
shooting status of the clip.
VIDEO:
Displays [FRAME RATE] (frame rate of the
clip), [PULL DOWN], and [ASPECT RATIO].
AUDIO:
[SAMPLING RATE] (sampling frequency of
recorded sound) and [BITS PER SAMPLE]
(digitized bit[s] of recorded sound).
USER CLIP NAME:
Displays the clip name specified by the user.*
ACCESS: Displays [CREATOR] (person who recorded
the clip), [CREATION DATE] (date when the
clip was recorded), [LAST UPDATE DATE]
(date of the latest update of the clip), and
[LAST UPDATE PERSON] (person who made
the latest update of the clip).
DEVICE: Displays [MANUFACTURER] (name of the
device manufacturer), [SERIAL NO.] (serial
number of the device) and [MODEL NAME]
(model name of the device).
SHOOT: Displays [SHOOTER] (name of the person
who shot the video), [START DATE] (start date
of shooting), [END DATE] (end date of
shooting),
LONGITUDE/LATITUDE/SOURCE/PLACE
NAME (altitude, longitude, latitude, and
source of the information and name of the
location).
2
SCENARIO*
:
Displays [PROGRAM NAME], [SCENE NO.],
and [TAKE NO.].
NEWS:
Displays [REPORTER] (name of the reporter),
[PURPOSE] (purpose of shooting), and
[OBJECT] (object of shooting).
84
and
[LOCATION]
ALTITUDE/
3
MEMO*
: Displays [OFFSET] (location of the frame
where the text memo is added), [PERSON]
(person who recorded the text memo added to
the clip), and [TEXT] (contents of the text
memo). The AJ-SPC700E can record one text
memo per clip.
*1 When there is no information on the metadata upload
file, the global clip ID is used as the USER CLIP
NAME.
*2 Be sure to enter PROGRAM NAME when entering
SCENARIO. It is not possible to record only the
SCENE NO or TAKE NO.
*3 Be sure to enter TEXT when entering MEMO. It is not
possible to record only PERSON or OFFSET.
<Note>
The AJ-SPC700E only displays printable ASCII
characters.
To set whether or not the uploaded metadata is
recorded
Set ON/OFF by selecting META DATA
menu bar.
Clear the uploaded metadata
Select META DATA
press the SET button. Select "YES" when the confirmation
screen is displayed.
6-13 Setting of Proxy (optional)
By attaching the video encoder card (AJ-YAX800G, optional)
1
either to the optional slot or Slot 5, it is possible to specify
the proxy recording setting.
Select OPERATION
the menu bar to specify the setting.
For more information on settings, see the video encoder
card instruction manual.
(continued)
RECORD from the
INITIALIZE from the menu bar, and
DEVICE SETUP
PROXY from
Advertisement
Table of Contents
