Table of Contents
Advertisement
Chapter 4 Adjustments and Settings for Recording
4-10-4 How to Use Scene File Data
It is possible to write the settings data into the scene file area
of the internal memory of the AJ-SPC700E, or to read data
written in this area. Four types of scene files are available.
This data allows you to quickly reproduce an optimum setup
state.
TITLEs 1 - 4 are factory-assigned the defaults for the AJ-
SPC700E.
To change the settings, go to the <SCENE> screen from the
FILE page.
To write settings data for scene files
1
Navigate the menu to the SCENE screen.
2
Turn the JOG dial button to move the cursor to the
SCENE SEL option.
3
Press the JOG dial button to blink scene file numbers.
Then, turn the dial button to select a desired scene file
number.
4
Press the JOG dial button to accept the scene file.
5
Turn the JOG dial button to return the cursor to the
option WRITE.
6
Press the JOG dial button to display the following
message:
7
Turn the JOG dial button to move the cursor to YES.
Then, press the dial button.
This writes the setting data into the scene file area of
the AJ-SPC700E internal memory.
8
To exit the menu, press the MENU button.
(continued)
61
4
Advertisement
Table of Contents
