Specifications; E-Studio550/650/810 - Toshiba e-STUDIO 550 Servicec Support Manual

4. Specifications

A. e-STUDIO550/650/810
Model name
Type
Original glass
Copying system
Developing system
Fixing method
Photoconductor type
Original scanning system
Light source
Resolution
Page memory
PM cycle
Acceptable originals
Max. original size
Reverse auto document feeder (RADF)
Acceptable original paper size
Acceptable original paper weight
Stack capacity
Original feeding speed
First copy time
Warm-up time
Multiple copying
Reproduction ratio
Density control
June 2002 ©TOSHIBA TEC
DP-5510/6510/8110
Console type
Fixed (original referenced to top left, referenced to
center when using RADF)
Indirect electrophotographic method
2-component magnetic brush developing
Heat roller (Induction heating)
OPC Drum
Linear CCD sensor
Xenon lamp
600dpi x 2400dpi with smoothing
RAM: 32MB, HDD: 10GB
e-STUDIO550: 400k sheets
e-STUDIO650: 460k sheets
e-STUDIO810: 500k sheets
Sheets, books and three-dimensional objects
LD or A3
Standard, Sheet through type
LD, LG, LT, LT-R, ST-R, COMP
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
Side original: 13-34lb., 50-127 g/m²
2-Side original: 13-28lb., 50-104 g/m²
100 sheets (20lb., 80g/ m² Bond)
65 originals/min.
3.2 seconds or less
(LT or A4, upper cassette, 100%, original placed
manually)
Approx. 160 seconds (+20% or less)
(e-STUDIO550/650/810, Temperature: 20°C)
Up to 9999 copies (digital key enter)
Actual size: 100±0.5%
Zoom: 25-400% (in 1% increments)
For the RADF: 25-200% (in 1% increments)
Automatic density mode and manual density mode
selectable 11 steps
4-1 e-STUDIO550/650/810 Specifications