Table of Contents
Advertisement
Settings menu J
To open the Settings menu
A Turn the programme selector to
Finish. The main menu will appear.
15:03
Select a programme
Settings F ...
B Press the OK button.
C This will take you into the Settings
menu.
C
Back A
Language F
Suds cooling
D Use the – and + buttons to select the
setting you want and confirm your
selection by pressing the OK button.
To close the Settings menu
^ Select Back and confirm your
selection. The display will return to
the entry menu.
Language J
The display can be set to appear in
one of several different languages.
You can change the language
displayed via the Languages
sub-menu.
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
A tick will appear beside the language
to show that it has been set.
60
The different language setting will only
apply to the programme currently in
use. After the programme has finished
the display will revert to the default
language which was set in the
Settings/Supervisor level menu.
Suds cooling
When this is activated, additional
water flows into the drum at the end
of the main wash to cool the suds
down. Hot suds can damage plastic
drainage pipes.
Suds cooling takes place when
temperatures of more than 70°C are
selected.
Suds cooling should be activated:
– to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The machine is delivered with Suds
cooling activated.
Advertisement
Table of Contents
