Table of Contents
Advertisement
What to do, if . . .
With the help of the following notes, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
N.B. A call-out charge will be applied for unnecessary service visits where the
problem could have been rectified by the customer as described in this instruction
manual.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in accordance with local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
The display remains
dark and the
programme selector
is not lit up.
The programme
does not start when
Drain/Spin has been
selected.
The display is dark. The display has
Possible cause
There is no power to
the machine.
The machine has not
been prepared for
using for the first time.
switched off
automatically to save
energy (Standby
mode).
Problem solving guide
Remedy
Check whether
– the electricity supply to the
machine is switched on.
– the fuse or circuit breaker
has tripped.
Prepare the machine as
described in Before using for
the first time.
Press a button. Standby comes
to an end.
37
Advertisement
Table of Contents
