Table of Contents
Advertisement
,
To avoid the risk of injury the
holes for the transit bars must be
covered after the transit bars have
been removed.
^ Fit the covers on to the two holes.
Then plug the holes as shown with
the caps.
^ Secure the transit struts to the back
of the machine. Make sure that holes
b are fitted over retainers a.
Installation and connection
,
The machine must not be moved
without the transit struts in place.
Store them as shown or keep them
in a safe place for future use. They
must be re-fitted if the machine is to
be moved again (e.g. when moving
house).
Re-fitting the transit struts
Re-fitting is carried out by reversing the
procedure.
51
Advertisement
Table of Contents
