Table of Contents
Advertisement
Settings/Supervisor level menu
Minimum iron duration
You can increase the wash duration
for the main wash in the Minimum
iron programme.
The machine is delivered with the Block
parameters option selected (the wash
duration will be controlled according to
the programme data which has been
programmed on-site).
Pre-wash
You can choose for pre-wash to be
carried out with every Cottons and
Minimum iron programme or to select
it on an individual basis.
If pre-wash has been selected as a
default (Permanent), the indicator light
for the Pre-wash button will be lit up.
The machine is delivered with the Menu
selection option activated for pre-wash.
List of special programmes
You can add more special
programmes to the number of
programmes available.
Option 1: The Quick wash, Shirts,
Starch, Pillows, Outerwear and Proofing
programmes are listed in the display.
(the machine is delivered with this
option selected)
Option 2: The Intensive wash
programme is offered in addition to the
Option 1 programmes.
66
Option 3: The Flour, Flour + and Grease
and fat programmes are available in
addition to the Option 1 programmes.
Option 4: The Grease and fat and
Grease and fat + programmes are
available in addition to the Option 1
programmes.
Option 5: The Towels short, Towels +
and Capes programmes are available
in addition to the Option 1 programmes.
Option 6: The Chem. Therm. Dis.
(Chemothermal Disinfection 20min
60°C) programme is available in
addition to the Option 1 programmes.
,
If this washer-extractor is to be
used for disinfection it must be
connected to a multi-phase
(two-phase or three-phase) supply.
Hygiene
If a programme has been run using
temperatures below 60°C a
message will appear in the display at
the end of the programme asking you
to run the Hygiene programme.
The machine is delivered with the
Hygiene option deselected.
Advertisement
Table of Contents
