Re-Fitting The Transit Struts - Miele PW 6065 Plus Sluice Operating And Installation Instructions

^ Fit the covers on to the two holes.
Then plug the holes as shown with
the caps.
^ Secure the transit struts to the back
of the washer-extractor. Make sure
that holes b are fitted over retainers
a.
Installation and connection
,
The machine must not be moved
without the transit struts in place.
Store them as shown or keep them
in a safe place for future use. They
must be re-fitted if the machine is to
be moved again (e.g. when moving
house).

Re-fitting the transit struts

Re-fitting is carried out by reversing the
procedure.
55