Step 1A: Quick Start Setup Procedures - 8e6 Technologies R3000 Quick Start Manual

Step 1A: Quick Start Setup Procedures

Link the Workstation to the R3000
Monitor and Keyboard Setup on 1U Units
A. Connect the PC monitor and keyboard cables to the rear of the chassis (see Fig. 1
for an "H" unit, Fig. 2 for non-"H" 1U units, and Fig. 3 for a mini tower unit).
B. turn on the PC monitor.
C. Power on the R3000 by dropping down the face plate and pressing the large but-
ton at the right of the front panel (see Fig. 4 for a 1U unit, and Fig. 5 for a mini tower
unit).
once the R3000 is powered up, proceed to the Login screen instructions.
Serial Console Setup
A. Using the serial port cable (and USB DB9 serial adapter, if necessary), connect the
laptop to the rear of the chassis (see Fig. 1 for an "H" unit, Fig. 2 for non-"H" 1U
units, and Fig. 3 for a mini tower unit).
B. Power on the laptop.
C. Power on the R3000 by pressing the large button on the front panel (see Fig. 4 for
1U units and Fig. 5 for mini tower units).
Fig. 2 - Rear of non-"H" server 1U chassis
Fig. 4 - Front of the 1U chassis

Fig. 1 - Rear of "H" chassis
mini tower (above).
Fig. 3 - Rear of the
Fig. 5 - Front of the
mini tower (right).
8 6 R3000 Q
e
S G
uick taRt uide