Step 2: Verify The Failed Drive In The Admin Console - 8e6 Technologies R3000 User Manual

Enterprise filter

Hide thumbs Also See for R3000:

Table of Contents

Step 2: Verify the failed drive in the Admin console

The Hardware Failure Detection window in the Adminis-

trator console is accessible via the System > Hardware

Failure Detection menu selection:

Fig. G-2 Hardware Failure Detection window

The Hardware Failure Detection window displays the

current RAID Array Status for the two hard drives (HD 1 and

HD 2) at the right side of the window.

Normally, when both hard drives are functioning without

failure, the text "OK" displays to the right of the hard drive

number, and no other text displays in the window.

However, if a hard drive has failed, the message "FAIL"

displays to the right of the hard drive number.