Step 3: Test Filtering Or The Mobile Client Connection - 8e6 Technologies R3000 Quick Start Manual

Step 3: Test Filtering or the Mobile Client Connection

Test Filtering
if this R3000 has been set up in the invisible, Router, or Firewall mode, once you have
accessed the R3000 Administrator console, you should test filtering.
A. Test the R3000's filtering by opening a browser window on a network workstation,
and then going to the following empty sites to test pornography filtering:
• http://test.8e6.net
• http://test.marshal8e6.com.tw
• http://testsite.marshal.com
B. You should receive a block page for each URL tested. if you do not, contact an 8e6
technologies solutions engineer or technical support representative.
Test the Mobile Client Connection
If this R3000 has been set up in the Mobile mode, you do not need to test filtering. In-
stead, once you have accessed the R3000 Administrator console, you should verify that
the Mobile Client can reach the R3000.
A. Use a workstation on which the Mobile Client is installed that is not on a filtered por-
tion of the LAn. open a browser window on a network workstation, and then go to a
few test sites you set up to be blocked by the Mobile Client.
B. the connections should be blocked, and the block pages served by the R3000
should display in the browser's Address field. If you do not receive a block page for
each tested URL, contact an 8e6 technologies solutions engineer or technical sup-
port representative.
8 6 R3000 Q S G
e uick taRt uide
3