Login Screen - 8e6 Technologies R3000 Quick Start Manual

Login screen

the login screen displays after powering on the R3000 1U unit, or creating a Hyperter-
minal session for the mini tower unit.
NOTE: If the screensaver currently displays on your screen, press the Enter
key to display the login screen.
A. At the login prompt, type in menu.
B. Press the Enter key to display the Password prompt.
C. At the Password prompt, type in the following: #s3tup#r3k
D. Press Enter to display the Quick Start menu screen.
Quick Start menu screen
A. At the Press the number of your selection prompt, press 2 to select the Quick
Start setup process.
B. At the login prompt, re-enter your password: #s3tup#r3k
C. Press Enter to display the administration menu where you can begin using the Quick
Start setup procedures.
6 8 6 R3000 Q S G
e uick taRt uide