Ac Power Cord And Cable Precautions; Electrical Safety Precautions - 8e6 Technologies R3000 Quick Start Manual

AC Power Cord and Cable Precautions

Warning:
• the AC power cord for the server must be plugged into a grounded, power outlet.
• Do not modify or use a supplied AC power cord if it is not the exact type required in
the region where the server will be installed and used. Replace the cord with the cor-
rect type.
• Route the AC power cord and cables away from moving parts and foot traffic.
• Do not allow anything to rest on the AC power cord and cables.
• never use the server if the AC power cord has been damaged.
• Always unplug the AC power cord before removing the unit for servicing.

Electrical Safety Precautions

Warning:
Heed the following safety precautions to protect yourself from harm and the server from
damage:
CAUTION: Dangerous voltages associated with the 100-240 V AC power
supply are present inside the unit. To avoid injury or electrical shock, do not touch
exposed connections or components while the power is on.
• to prevent damage to the server, read the information in this document for selection
of the proper input voltage.
• Do not wear rings or wristwatches when troubleshooting electrical circuits.
• To avoid fire hazard, use only the specified fuse(s) with the correct type number,
voltage, and current ratings. Only qualified service personnel should replace fuses.
• Qualified service personnel should be properly grounded when servicing the unit.
• Qualified service personnel should perform a safety check after any service is per-
formed.
8 6 R3000 Q S G
e uick taRt uide