Step 1A: Quick Start Setup Procedures - 8e6 Technologies R3000 Quick Start Manual

Step 1A: Quick Start Setup Procedures

Link the Workstation to the R3000
Monitor and Keyboard Setup
A. Connect the PC monitor and keyboard cables to the rear of the chassis (see Fig. 1
for an SL or MSA unit, and Fig. 2 for an HL unit).
B. Turn on the PC monitor.
C. Power on the R3000 by dropping down the face plate and pressing the large button
at the right of the front panel (see Fig. 3 for an SL unit, Fig. 4 for an MSA unit, and
Fig. 5 for an HL unit).
Once the R3000 is powered up, proceed to the Login screen instructions.
Serial Console Setup
A. Using the serial port cable (and USB DB9 serial adapter, if necessary), connect the
laptop to the rear of the chassis (see Fig. 1 for an SL or MSA unit, and Fig. 2 for an
HL unit).
B. Power on the laptop.
C. Power on the R3000 by pressing the large button on the front panel (see Fig. 3 for an
SL unit, Fig. 4 for an MSA unit, and Fig. 5 for an HL unit).
8 6 R3000 i F Q
e nteRnet ilteR
Fig. 1 - Portion of SL and MSA chassis rear
Fig. 2 - Portion of HL chassis rear
S G
uick taRt uide