Step 1A: Quick Start Setup Procedures - 8e6 Technologies R3000 Quick Start Manual

Step 1A: Quick Start Setup Procedures

Link the Workstation to the R3000IR
Monitor and Keyboard Setup
A. Connect the PC monitor and keyboard cables to the rear of the chassis (see Fig. 1).
B. Turn on the PC monitor.
C. Power on the R3000IR by dropping down the face plate and pressing the large but-
ton at the right of the front panel (see Fig. 2).
Once the R3000IR is powered up, proceed to the Login screen instructions.
Serial Console Setup
A. Using the serial port cable (and USB DB9 serial adapter, if necessary), connect the
laptop to the rear of the chassis (see Fig. 1).
B. Power on the laptop.
C. Power on the R3000IR by pressing the large button on the front panel (see Fig. 2).
Fig. 2 - Diagram of MSA chassis front panel, power button at far right
Once the R3000IR is powered up, proceed to the instructions for HyperTerminal Setup
Procedures.
8 6 R3000iR Q S G
e uick taRt
Fig. 1 - Portion of MSA chassis rear
uide