Chapter 8: Installation; Introduction - Raymarine hsb2 PLUS Series Owner's Handbook Manual

Chapter 8: Installation

Chapter 8: Installation

8.1 Introduction

This chapter provides installation instructions for the
Display. Simple systems such as that in Figure 8-1 below, or integrated
systems (see Section 8.8) are explained. Details for mounting the
LCD Display and connecting the equipment are included.
• To install a single
Section 8.2 to Section 8.6.
If this display is a radar unit, you should then test the display as described in
Section 8.7.
• To connect your display to other equipment, follow the guidelines in
Section 8.8 and Section 8.9, taking particular care to ensure the correct
polarity of the SeaTalk supply.
• To install multiple displays, install the first display and any other equip-
ment, then test the system as described in Section 8.2 to Section 8.9. You
can then install additional displays.
• Details on installing the scanner are provided in the Pathfinder Plus
Radar Scanner Owner's Handbook.
Scanner
Compass
Figure 8-1:
2
series display unit follow the instructions in
hsb
Display Unit
NMEA
12/24V Supply
12V Supply
Typical System - Single Display Unit
2
series Color LCD
hsb
Junction
Box
SeaTalk
Distribution Panel
12V Supply
8-1
2
hsb series
GPS
D4288-2