Raymarine hsb2 PLUS Series Owner's Handbook Manual page 134

Chapter 5: Standard Chart Operations
You should always check the target waypoint before initiating a follow
route.
➤ To follow the current route:
GOTO
1. Press the GOTO default soft key. The Goto/Follow soft keys are displayed.
2. Press the FOLLOW ROUTE soft key.
FOLLOW
ROUTE
Alternatively, to follow a route:
1. Place the cursor over a route leg until the letters RTE and the route soft keys
RTE are displayed then press FOLLOW ROUTE .
FOLLOW
Your vessel's current position becomes the origin, and the target waypoint in
ROUTE
the current route becomes the active target.
The soft keys change as follows:
STOP
FOLLOW
These options are described in the following sections.
➤ To follow the current route in reverse:
1. Press the ROUTE default soft key, followed by MORE . The route soft keys
ROUTE
are displayed.
REVERSE
2. Press the REVERSE ROUTE soft key. The current route is reversed on the
ROUTE
screen. Press ENTER or CLEAR .
3. Press the GOTO default soft key. The Goto/Follow soft keys are displayed.
GOTO
4. Press the FOLLOW ROUTE soft key.
FOLLOW
The soft keys change as follows:
ROUTE
STOP
FOLLOW
These options are described in the following sections.
Alternatively:
RTE
1. Place the cursor over the route leg until the letters RTE and the route soft
REVERSE
keys are displayed. Press REVERSE ROUTE then FOLLOW ROUTE .
ROUTE
Your vessel's current position becomes the origin, and the target waypoint in
FOLLOW
the current route becomes the active target.
ROUTE
EDIT CLEAR
ROUTE ROUTE
GOTO RESTART
CURSOR XTE
REVERSE
ROUTE
D4251_1
WAYPOINT
ADVANCE
D4172-1
5-31