Course Computer - Raymarine hsb2 PLUS Series Owner's Handbook Manual

E-2
GPS
SeaTalk
Typical SeaTalk System
Figure E-1:

Course Computer

If you have a Raymarine course computer and active compass we recommend
that you configure your system as follows:
• Disconnect any compass directly connected to the course computer.
• Ensure the active compass is re-wired to provide heading data on NMEA.
• Power the active compass from the course computer.
• Connect the active compass to the NMEA input of the course computer
and to the NMEA input of your display as shown in the following illustra-
tion.
• Set Bridge NMEA Heading OFF in the display System Set Up menu.
Scanner
G Series Course Computer
SeaTalk
NMEA
Fluxgate Compass
12/24V Supply
2
System with a G-Series Course Computer
hsb
2
PLUS Series Color LCD Display
hsb
POWER
SeaTalk
Distribution Panel
12/24V Supply
GAIN
DISPLAY
SEA
MOB
MARKS
MULTI
VRM/EBL
ALARMS RANGE
ENTER CLEAR MENU
D5669-1