Raymarine hsb2 PLUS Series Owner's Handbook Manual page 139

5-36
➤ To save waypoints to, or load waypoints from a user cartridge:
CAUTION:
Loading waypoints from a user cartridge overwrites any existing
waypoint and route lists.
1. Insert a C-MAP User Card into the lower of the two cartridge slots.
1. Press MARKS followed by the LOAD/SAVE USER CARD soft key.
MARKS
2. The User Card Menu and associated soft keys are displayed.
3. Press the SAVE WPT/RTE DATA TO CARD or LOAD WPT/RTE DATA FROM
CARD soft key; an appropriate warning and Yes/No soft keys are displayed.
4. Press Yes to continue or No to abandon the operation and return to the pre-
vious screen.
5. If the operation is successful, confirmation of the number of Routes and
Waypoints saved/loaded is displayed.
If the operation fails, the Save Failed message is displayed.
USER CARD MENU
USER CARD PRESENT
WARNING
SAVING DATA TO THE USER
CARD WILL ERASE ALL EXISTING
WAYPOINT AND ROUTE DATA
ON THE CARD.
USER CARD MENU
USER CARD PRESENT
SAVE COMPLETE
SAVED 2 ROUTE(S) AND
7 WAYPOINT(S)
LOAD WPT/ SAVE WPT/
RTE DATA RTE DATA
FROM CARD TO CARD
2
PLUS Series Color LCD Display
hsb
ARE YOU SURE ?
YES NO
D5594-1
CHECK
CARD IN
USER SLOT
D5595-1