Toshiba Stratagy Flash Installation Manual page 7

Before You Install Stratagy Flash with Strata DK...
please read and complete both sides of this checklist.
This checklist only highlights important installation information. Please reference the Stratagy Flash Installation
Guide for details on programming individual features, etc.
CAUTION! After making any significant program changes to the Stratagy, it is recommended the system
be properly shut down and restarted. This copies the most current database to the
C:\Stratagy\Archive\Good directory for use by the Automatic System Recovery feature (see
"Automatic System Recovery" in the Stratagy Flash Installation Guide ). Failure to do so could
result in the loss of customer information if the system loses power before it is properly
shutdown and rebooted.
+DQGOLQJ WKH 6WUDWDJ\ )ODVK 9RLFH 3URFHVVLQJ 6\VWHP
1
Do not attempt to open the Stratagy Flash enclosure. There are no field-serviceable parts
inside. Opening the Stratagy Flash system voids the warranty.
❐
Check the items contained in the package against the packing list. In addition to the hardware
components, you receive a copy of the Stratagy Flash Wall-Mounting Template and Instructions.
❐
Inspect all equipment for damage. If equipment is missing or damaged, contact the shipping company
or your dealer sales specialist immediately.
❐
Save the original shipping box for re-use when transporting system hardware. The original packing
material has been specifically designed to offer the Stratagy Flash system maximum protection.
3RZHU &RQVLGHUDWLRQV
2
❐
Always connect the Stratagy Flash system to a dedicated 110VAC outlet.
❐
If your Stratagy Flash installation is in an area with unreliable power, you should also install a Power
Conditioner to avoid any failures that can be caused by power fluctuations, including hardware failure
and file corruption. A Toshiba recommended ONEAC
Uninterruptible Power Supply (UPS) with Power Conditioner and Ground Bar is available (Part
Number: ON400XRA-G0).
6\VWHP $GPLQLVWUDWLRQ
3
Stratagy Admin Release 3 software is only supported by the Stratagy Flash and
Stratagy DK Release 3 and cannot be used with any Release 2 Stratagy systems.
❐
Telephone Administration is available on Stratagy Flash systems. A special System Administrator
User ID mailbox (User ID 999) can be used by the System Administrators to add, delete and reset user
mailboxes, add user names to the directory, reset security codes on user mailboxes, change the time on
the Stratagy system and record the system announcement and busy music.
❐
Local Administration on the Stratagy Flash requires a portable or desktop PC with MS DOS® 6.2,
Stratagy Admin software, 5MB available hard disk space, a 3.5" 1.44 floppy disk drive and 580KB
free RAM. You'll also need a 9-pin null-modem serial cable or Toshiba SG-ADMCBL cable to
connect your PC to the Stratagy Flash.
Note In order to maintain Stratagy Flash system integrity, customer-supplied anti-virus software
should be resident and active on any PC that is connected to the Stratagy Flash system. Refer
to Stratagy Technical Bulletin TB40-0017 for further information.
❐
Remote Administration on the Stratagy Flash system requires an external modem be connected to the
Stratagy Flash's COM 2 port. (See the Stratagy Flash Installation Guide for installation details.)
Copyright  Toshiba America Information Systems, Inc.
™
Model ON400 (400 VA, 1/2 hour)
February 2002