MAINTENANCE WORK ON CHASSIS AND ENGINE
Installing the lower triple clamp
9.18
–
Remove nut
300739-10
–
Remove protector ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
300740-10
x
–
Clean the bearing and sealing elements, check for damage, and grease.
Long-life grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
Info
Check that the O-rings of the steering head seals are correctly positioned.
400563-01
–
Push on protective ring
–
Mount and tighten nut
Requirement
Steering head nut
300739-11
–
Position the upper triple clamp.
–
Mount nut
Requirement
Nut, steering stem
300738-10
–
Position the fork legs.
–
Tighten screw
Requirement
Screw, top triple clamp
–
Fully tighten screw
Requirement
Screw, bottom triple clamp
300741-10
–
Repeat the operation on the opposite side.
.
.
p. 75)
.
.
, but do not tighten it yet.
.
.
M20x1.5
10 Nm (7.4 lbf ft)
M20x1.5
30 Nm
(22.1 lbf ft)
M8
25 Nm
(18.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
29