Important Maintenance Work To Be Carried Out By An Authorized Ktm Workshop. (As Additional Order); Performance Of Urgent Inspection And Care Work By The Supervisory Individual - KTM 50 SX Owner's Manual

SERVICE SCHEDULE

Important maintenance work to be carried out by an authorized KTM workshop. (as additional order)

8.2
Clean and adjust carburetor.
Check intake membrane for wear.
Checking wear of clutch linings.
Checking wear of clutch drum.
Check cylinder and piston for wear.
Check the seating of the piston pin.
Check main bearing of the crankshaft.
Check radial clearance of conrod bearing.
Change crankshafts and conrod bearings.
Carry out a complete fork service.
Carry out a complete shock absorber service.
Clean and lubricate swingarm bearing.
Grease the steering head bearing.
Change glass fiber yarn filling of main silencer.
Change the front brake fluid.
Change the rear brake fluid.
S20A: Every 20 service hours
S40A: Every 40 service hours
J1A: annually

Performance of urgent inspection and care work by the supervisory individual.

8.3
Check the gear oil level. (
Check the front brake brake fluid level. (
Check the rear brake fluid level. (
Check the front brake linings. (
Check the rear brake linings. (
Check and adjust Bowden cables.
Bleed fork legs.
Clean dust boots of fork legs. (
Clean the chain. ( p. 33)
Check the chain tension. (
Check the chain wear.
Check rear sprocket / engine sprocket for wear. (
Clean the air filter. ( p. 51)
x
Check the tire air pressure. (
Check the tire condition. (
Check the coolant level. (
Check all controls for smooth operation.
Check braking.
Check all screws, nuts and hose clamps regularly for tightness.
NB1A: Depending on conditions of use according to requirements.
x
x
x
x
x
x
x
x
x
x
x
x
( p. 30)
x
x
x
x
p. 55)
p. 37)
p. 41)
p. 38)
p. 42)
p. 24)
p. 33)
p. 34)
p. 46)
p. 45)
p. 48)
20
S20A S40A J1A
•
• •
• •
• •
• •
• •
• •
• •
•
•
•
•
•
• •
•
•
NB1A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•