Removing The Fork Legs; Installing The Fork Legs - KTM 50 SX Owner's Manual
Ktm 50 sx series motorcycles owner's manual
Hide thumbs
Also See for 50 SX:
- Repair manual (159 pages) ,
- Owner's manual (91 pages) ,
- Setup instructions (19 pages)
Table of Contents
Advertisement
MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing the fork legs
x
9.15
Installing the fork legs
x
9.16
–
Remove front wheel.
–
Dismount the start number plate. (
–
Remove screws
300731-10
–
Remove the screws
–
Hang the brake caliper and the brake line loosely to the side.
300732-10
–
Loosen screw
–
Loosen screw
300733-10
–
Position the fork leg.
–
Adjust the upper fork projection
Requirement
Upper fork projection
300734-10
–
Tighten screw
Requirement
Screw, top triple clamp
–
Fully tighten screw
Requirement
Screw, bottom triple clamp
300733-11
(
p. 44)
x
p. 31)
and take off clamp.
with the washers and take off the brake caliper.
. Remove the left fork leg.
. Remove the right fork leg.
.
.
.
10... 17 mm (0.39... 0.67 in)
M8
25 Nm
(18.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
27
Advertisement
Table of Contents
