Phonetics Sensaphone 800 User Manual page 97

Chapter 6: Acknowledgment, Status Report & Remote Access
The following commands are used to set or recite the High Alarm
Limit for any Zone.
Description
Set Zone High Limit
Description
What Is Zone High Limit W(9) + H(4) + (zone #)
Set and Recite Telephone Numbers
The following commands will allow you to program and recite
dialout telephone numbers. You may need to use the Special
Dialing Codes below.
Special Dialing Codes Summary
Code 1: Numeric pager type
Code 2: Wait for answer
Code 3: Change to Touch-Tone
Code 4: Pause
Code 5: Star (*)
Code 6: Pound (#)
Description
Setting a phone number
Description
Reciting a phone number W(9) + T(8) + (entry 1–8)
Record and Play Custom Voice Messages
The following commands will allow you to record and play
back custom voice messages for the ID message (0) and
each zone (1–8).
Description
Record a Message
Description
Play a Message
Touch-Tone Command
S(7) + H(4) + (zone #) + (value)+ #
Touch-Tone Command
Touch-Tone Command
S(7) + T(8) + (entry 1–8) + (telephone
number) + #
Touch-Tone Command
Touch-Tone Command
S(7) + M(6) + (entry 0–8)
Touch-Tone Command
W(9) + M(6) + (entry 0–8)
94