Phonetics Sensaphone 800 User Manual page 96

Sensaphone Model 800 User's Manual
®
The commands are put together based on the letters of a touch-
tone telephone. See typical telephone keypad layout below.
Many of the commands use three letters that represent an
abbreviation of the selected command. For example, to Set a
High limit on Zone 1 you would press S + H + 1 (or in numeric
form 7 + 4 + 1)
The tables below list all of the touch-tone commands that are
supported. Commands are listed in both character and numeric
formats. The # key is used as an ENTER key. Use the * key to
represent a negative sign or to represent the [CODE] key when
programming telephone numbers.
Enable/Disable Zones
This command will toggle the selected zone between the enabled
or disabled state.
Description
Enable/Disable Zone
Set and Recite High & Low Alarm Limits
The following commands are used to set or recite the Low Alarm
Limit for any Zone.
Description
Set Zone Low Limit
Description
What Is Zone Low Limit W(9) + L(5) + (zone #)
93
���
� �
���
���
�
�
���� ���
�
�
�
Touch-Tone Command
* + Z(9) + (zone number)
Touch-Tone Command
S(7) + L(5) + (zone #) + (value) + #
Touch-Tone Command
���
�
���
�
����
�