Fcc Requirements - Phonetics Sensaphone 800 User Manual

FCC Requirements

Part 68: The Sensaphone Model 800 complies with Part 68 of the
®
FCC rules. On the back of the unit there is a label that contains,
among other information, the FCC Registration Number and the
Ringer Equivalence Number (REN) for this equipment. You must,
upon request, provide this information to your local telephone
company.
The REN is useful to determine the quantity of devices that you
may connect to your telephone line and still have all of those
devices ring when your telephone number is called. In most, but
not all areas, the sum of the RENs of all devices connected to
one line should not exceed five (5.0). To be certain of the number
of devices that you may connect to your line, you may want to
contact your local telephone company to determine the maximum
REN for your calling area.
This equipment may not be used on coin service provided by the
telephone company. Connection to party lines is subject to state
tariffs.
Should the Model 800 cause harm to the telephone network, the
telephone company may discontinue your service temporarily.
If possible, they will notify you in advance. But if advance
notice isn't practical, the telephone company may temporarily
discontinue service without notice and you will be notified as
soon as possible. You will be informed of your right to file a
complaint with the FCC. The telephone company may make
changes in its facilities, equipment, operations, or procedures
where such action is reasonably required in the operation of its
business and is not inconsistent with the rules and regulations
of the FCC that could affect the proper functioning of your
equipment. If they do, you will be notified in advance to give you
an opportunity to maintain uninterrupted telephone service.
If you experience trouble with this equipment, or you need
information on obtaining service or repairs, please contact:
PHONETICS, INC.
901 Tryens Road, Aston, PA 19014
610-558-2700 Fax: 610-558-0222
The telephone company may ask that you disconnect this
equipment from the network until the problem has been corrected
or until you are sure that the equipment is not malfunctioning.
v