Rs-232 Default Parameters - Symbol LS3478-FZ Reference Manual

RS-232 Default Parameters

Table 6-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s) provided in the
parameter descriptions section beginning on page 6-6.
See Appendix A, Standard Default Parameters
default parameters.
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Parity
Check Receive Errors
Stop Bit Select
Data Bits
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
for all user preference, host, symbology, and miscellaneous
Table 6-1. RS-232 Host Default Table
Parameter Default Page Number
Standard RS-232 6-8
9600 6-9
None 6-11
Enable 6-12
1 Stop Bit 6-13
8-Bit 6-13
None 6-14
None 6-16
Minimum: 2 sec 6-18
Host: Low RTS 6-19
Disable 6-19
Minimum: 0 msec 6-20
Normal Operation 6-21
Send Bar Code 6-22
RS-232 Interface 6-5