Rs-232 Default Parameters - Symbol DS3578 User Manual

RS-232 Default Parameters

Table 8-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s)
provided in the parameter descriptions section beginning on
NOTE See
miscellaneous default parameters.
RS-232 Host Default Table
Table 8-1
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Parity
Check Receive Errors
Stop Bit Select
Data Bits
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
Appendix A, Standard Default Parameters
Parameter
page 8-4.
for all user preference, host, symbology, and
Default
Standard RS-232 8-6
9600 8-7
None 8-8
Enable 8-8
1 Stop Bit 8-9
8-Bit 8-9
None 8-10
None 8-12
Minimum: 2 sec 8-14
Host: Low RTS 8-15
Disable 8-15
Minimum: 0 msec 8-16
Normal Operation 8-17
Send Bar Code 8-18
RS-232 Interface
Page
Number
8 - 3