Symbol LS-3203ER Product Reference Manual
  1. Manuals
  2. Brands
  3. Symbol Manuals
  4. Barcode Reader
  5. LS-3203ER
  6. Product reference manual
Symbol LS-3203ER Product Reference Manual

Symbol LS-3203ER Product Reference Manual

Parameter menus
Hide thumbs
Table of Contents

Advertisement

Quick Links

Set Default Parameter
Host Interface Select
RS-232C Parameters
Fixed Format Options
Code Types
Code 2 of 5 Lengths
Decode Options
UPC-A Preamble
UPC-E Preamble
Intercharacter Delay
Data Transmission Formats
Prefix/Suffix Values
Transmit Code ID Character
Transmit AIM ID Character
Laser On Time-out
Baud Rate
Parity
Beep on BEL
Hardware Handshaking
Software Handshaking
Stop Bit Select
ASCII Format
Power Mode
Chapter 3 Parameter Menus
3-1
page 3-3
page 3-4
page 3-5
page 3-6
page 3-9
page 3-11
page 3-17
page 3-18
page 3-19
page 3-21
page 3-22
page 3-24
page 3-25
page 3-26
page 3-28
page 3-29
page 3-30
page 3-31
page 3-32
page 3-33
page 3-34
page 3-35

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LS-3203ER and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Symbol LS-3203ER

Summary of Contents for Symbol LS-3203ER

  • Page 1 Chapter 3 Parameter Menus Set Default Parameter page 3-3 Host Interface Select page 3-4 RS-232C Parameters Fixed Format Options page 3-5 Code Types page 3-6 Code 2 of 5 Lengths page 3-9 Decode Options page 3-11 UPC-A Preamble page 3-17 UPC-E Preamble page 3-18 Intercharacter Delay...
  • Page 2 LS 3203ER Product Reference Guide: Parameter Menus Wand Host Parameters Wand Host Interface page 3-36 Code Types page 3-37 Code 2 of 5 Lengths page 3-40 Decode Options page 3-42 Laser On Time-out page 3-44 Power Mode page 3-46 Wand Emulator Bar Output page 3-47 Variable Leading Margin page 3-48...

  • Page 3: Set Default Parameters

    LS 3203ER Product Reference Guide: Parameter Menus Set Default Parameters Refer to the Default Table on page 2-28. To set defaults for any or all host types, scan the appropriate bar code below. Then select a specific host interface on the next page. SET RS-232C DEFAULTS SET WAND DEFAULTS SET SYNAPSE DEFAULTS...

  • Page 4: Host Interface Select

    LS 3203ER Product Reference Guide: Parameter Menus Host Interface Select To select a host interface, scan the appropriate bar code below. SET RS-232C HOST SET WAND HOST SET SYNAPSE HOST...

  • Page 5: Fixed Format Options

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Fixed Format Options Select fixed format options for the terminals listed below. SET NIXDORF RS-232C FORMATS SET FUJITSU RS-232C FORMATS SET ICL RS-232C FORMATS...
  • Page 6 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Code Type Add or delete specific code types by scanning the appropriate bar code(s). ADD CODE 39 DELETE CODE 39 DELETE UPC-A ADD UPC-A DELETE UPC-E ADD UPC-E DELETE CODABAR ADD CODABAR...
  • Page 7 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Code Type ADD EAN-8 DELETE EAN-8 DELETE EAN-13 ADD EAN-13 DELETE I 2 OF 5 ADD I 2 OF 5 ADD D 2 OF 5 DELETE D 2 OF 5...
  • Page 8 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Code Type ADD CODE 128 DELETE CODE 128 ADD MSI/Plessey DELETE MSI/Plessey DELETE CODE 93 ADD CODE 93 ADD EAN 128 DELETE EAN 128...

  • Page 9: Code 2 Of 5 Lengths

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Code 2 of 5 Lengths To set the lengths for each code type: 1. Scan the desired option. 2. Scan two bar codes on page 3-10 for each desired length. For example, for a length of “12”, scan “1”...
  • Page 10 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Code 2 of 5 Lengths CANCEL 3-10...

  • Page 11: Decode Options

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Decode Options DO NOT TRANSMIT UPC-A TRANSMIT UPC-A CHECK DIGIT CHECK DIGIT DO NOT TRANSMIT UPC-E TRANSMIT UPC-E CHECK DIGIT CHECK DIGIT DO NOT CONVERT CONVERT UPC-E TO UPC-A UPC-E TO UPC-A 3-11...
  • Page 12 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Decode Options DECODE UPC/EAN IGNORE UPC/EAN WITH SUPPLEMENTALS WITH SUPPLEMENTALS ENABLE EAN ZERO EXTEND DISABLE EAN ZERO EXTEND TRANSMIT “NO DECODE” DO NOT TRANSMIT MESSAGE “NO DECODE” MESSAGE 3-12...
  • Page 13 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Decode Options ENABLE CLSI EDITING DISABLE CLSI EDITING ENABLE NOTIS EDITING DISABLE NOTIS EDITING ENABLE CODE 39 DISABLE CODE 39 FULL ASCII FULL ASCII VERIFTY CODE 39 DO NOT VERIFY CODE 39 CHECK DIGIT CHECK DIGIT 3-13...
  • Page 14 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Decode Options ITF-14/EAN-13 CONVERSION ITF-14/EAN-13 CONVERSION DISABLED ENABLED DO NOT BEEP AFTER GOOD DECODE BEEP AFTER GOOD DECODE DO NOT BUFFER CODE 39 BUFFER CODE 39 3-14...
  • Page 15 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Decode Options UPC/EAN SECURITY LEVEL 0 UPC/EAN SECURITY LEVEL 1 UPC/EAN SECURITY LEVEL 2 UPC/EAN SECURITY LEVEL 3 3-15...
  • Page 16 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Decode Options ENABLE 2 MSI/Plessey ENABLE 1 MSI/Plessey CHECK DIGITS CHECK DIGIT MSI 2 CHECK DIGITS MSI 2 CHECK DIGITS MOD 10 - MOD 10 MOD 11 - MOD 10 ENABLE CODABAR DISABLE CODABAR DECODE REDUNDANCY DECODE REDUNDANCY...

  • Page 17: Upc-A Preamble

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host UPC-A Preamble Select one option for UPC-A preamble by scanning the appropriate bar code. NONE SYSTEM CHARACTER SYSTEM CHARACTER & COUNTRY CODE 3-17...

  • Page 18: Upc-E Preamble

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host UPC-E Preamble Select one option for UPC-E preamble by scanning the appropriate bar code. NONE SYSTEM CHARACTER SYSTEM CHARACTER & COUNTRY CODE 3-18...

  • Page 19: Intercharacter Delay

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Intercharacter Delay To set a host communications intercharacter delay: 1. Scan the INTERCHARACTER DELAY bar code below. 2. Scan two bar codes on the next page which represent the desired delay (from 00 to 99 msec).
  • Page 20 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Intercharacter Delay CANCEL 3-20...

  • Page 21: Data Transmission Formats

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Data Transmission Formats Scan the option you wish to set. DATA AS IS <PREFIX> <DATA> <DATA> <SUFFIX> <PREFIX> <DATA> <SUFFIX> 3-21...

  • Page 22: Prefix/Suffix Values

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Prefix/Suffix Values To set a PREFIX/SUFFIX value: 1. Scan the option bar code you wish to set. 2. Scan four bar codes on the next page which correspond to the ASCII value or keystroke you wish to assign.
  • Page 23 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Prefix/Suffix Values CANCEL 3-23...

  • Page 24: Transmit Code Id Character

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Transmit Code ID Character Select whether to enable or disable this parameter. TRANSMIT CODE ID CHARACTER DO NOT TRANSMIT CODE ID CHARACTER 3-24...
  • Page 25 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Transmit AIM ID Character Select whether to enable or disable this parameter. TRANSMIT AIM ID CHARACTER DO NOT TRANSMIT AIM ID CHARACTER 3-25...

  • Page 26: Laser On Time-Out

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Laser On Time-out To select a laser on time-out, scan the bar code below or on the next page corresponding to the desired time. 0.5 SECONDS 1.0 SECONDS 2.0 SECONDS 1.5 SECONDS 3.0 SECONDS 2.5 SECONDS 3-26...
  • Page 27 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Laser On Time-out 3.5 SECONDS 4.0 SECONDS 4.5 SECONDS 5.0 SECONDS 3-27...

  • Page 28: Baud Rate

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Baud Rate Set the baud rate for RS-232C transmission. 4800 1200 9600 2400 19200 3-28...
  • Page 29 LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Parity Set the type of parity for RS-232C transmission. EVEN MARK SPACE NONE 3-29...

  • Page 30: Beep On Bel

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Beep on BEL Select whether or not enable this parameter. BEEP ON BEL DO NOT BEEP ON BEL 3-30...

  • Page 31: Hardware Handshaking

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Hardware Handshaking Select the type of RS-232C hardware handshaking protocol. NONE RTS/CTS 3-31...

  • Page 32: Software Handshaking

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Software Handshaking Select the type of RS-232C software handshaking protocol. NONE ACK/NAK ENQ ONLY ACK/NAK with ENQ XON/XOFF 3-32...

  • Page 33: Stop Bit Select

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Stop Bit Select Select the desired number of stop bits for RS-232C communications. 1 STOP BIT 2 STOP BITS 3-33...

  • Page 34: Ascii Data Format

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host ASCII Data Format Select either 7-bit or 8-bit ASCII format for RS-232C communications. 7-BIT 8-BIT 3-34...

  • Page 35: Power Mode

    LS 3203ER Product Reference Guide: Parameter Menus RS-232 Host Power Mode Select whether the laser remains on continuously, or turns off after a decode attempt (Low Power). CONTINUOUS ON LOW POWER 3-35...

  • Page 36: Wand Host Interface

    LS 3203ER Product Reference Guide: Parameter Menus Wand Host Interface Select the appropriate host by scanning one of the bar codes below. SYMBOLLINK CONTROLLER SYMBOL PORTABLE TERMINAL NORAND TERMINAL 3-36...
  • Page 37 LS 3203ER Product Reference Guide: Parameter Menus Wand Host Code Type Add or delete specific code types by scanning the appropriate bar code(s). ADD CODE 39 DELETE CODE 39 ADD UPC-A DELETE UPC-A DELETE UPC-E ADD UPC-E DELETE CODABAR ADD CODABAR 3-37...
  • Page 38 LS 3203ER Product Reference Guide: Parameter Menus Wand Host Code Type ADD EAN-8 DELETE EAN-8 DELETE EAN-13 ADD EAN-13 DELETE I 2 OF 5 ADD I 2 OF 5 DELETE D 2 OF 5 ADD D 2 OF 5 3-38...
  • Page 39 LS 3203ER Product Reference Guide: Parameter Menus Wand Host Code Type DELETE CODE 128 ADD CODE 128 ADD MSI/Plessey DELETE MSI/Plessey DELETE CODE 93 ADD CODE 93 DELETE EAN 128 ADD EAN 128 3-39...
  • Page 40 LS 3203ER Product Reference Guide: Parameter Menus Wand Host Code 2 of 5 Lengths To set the lengths for each code type: 1. Scan the desired option. 2. Scan two bar codes on page 3-41 for each desired length. For example, for a length of “12”, scan “1”...
  • Page 41 LS 3203ER Product Reference Guide: Parameter Menus Wand Host Code 2 of 5 Lengths CANCEL 3-41...

  • Page 42: Decode Options

    LS 3203ER Product Reference Guide: Parameter Menus Wand Host Decode Options DECODE UPC/EAN IGNORE UPC/EAN WITH SUPPLEMENTALS WITH SUPPLEMENTALS DO NOT BEEP AFTER GOOD DECODE BEEP AFTER GOOD DECODE ENABLE 1 MSI/Plessey ENABLE 2 MSI/Plessey CHECK DIGITS CHECK DIGIT 3-42...
  • Page 43 LS 3203ER Product Reference Guide: Parameter Menus Wand Host Decode Options MSI 2 CHECK DIGITS MSI 2 CHECK DIGITS MOD 10 - MOD 10 MOD 11 - MOD 10 ENABLE CODABAR DISABLE CODABAR DECODE REDUNDANCY DECODE REDUNDANCY UPC/EAN SECURITY LEVEL 0 UPC/EAN SECURITY LEVEL 1 UPC/EAN SECURITY LEVEL 2 UPC/EAN SECURITY LEVEL 3...

  • Page 44: Laser On Time-Out

    LS 3203ER Product Reference Guide: Parameter Menus Wand Host Laser On Time-out To select a laser on time-out, scan the bar code below or on the next page corresponding to the desired time. 0.5 SECONDS 1.0 SECONDS 2.0 SECONDS 1.5 SECONDS 3.0 SECONDS 2.5 SECONDS 3-44...
  • Page 45 LS 3203ER Product Reference Guide: Parameter Menus Wand Host Laser On Time-out 3.5 SECONDS 4.0 SECONDS 4.5 SECONDS 5.0 SECONDS 3-45...
  • Page 46 LS 3203ER Product Reference Guide: Parameter Menus Wand Host Power Mode Select whether the laser remains on continuously, or turns off after a decode attempt (Low Power). CONTINUOUS ON LOW POWER 3-46...

  • Page 47: Wand Emulator Bar Output

    LS 3203ER Product Reference Guide: Parameter Menus Wand Host Wand Emulator Bar Output Select the option that matches your host system. BAR HIGH BAR LOW 3-47...

  • Page 48: Variable Leading Margin

    LS 3203ER Product Reference Guide: Parameter Menus Wand Host Variable Leading Margin Select a variable leading margin. 80 msec 110 msec 120 msec 90 msec 100 msec 130 msec 3-48...
  • Page 49 LS 3203ER Product Reference Guide: Parameter Menus Wand Host Variable Leading Margin 140 msec 170 msec 180 msec 150 msec 190 msec 200 msec 160 msec 3-49...

  • Page 50: Convert All To Code 39

    LS 3203ER Product Reference Guide: Parameter Menus Wand Host Convert All to Code 39 Select whether or not to convert the decoded output to Code 39. CONVERT ALL TO CODE 39 DO NOT CONVERT ALL TO CODE 39 3-50...
  • Page 51 LS 3203ER Product Reference Guide: Parameter Menus Synapse Code Type Add or delete specific code types by scanning the appropriate bar code(s). ADD CODE 39 DELETE CODE 39 ADD UPC-A DELETE UPC-A ADD UPC-E DELETE UPC-E ADD CODABAR DELETE CODABAR 3-51...
  • Page 52 LS 3203ER Product Reference Guide: Parameter Menus Synapse Code Type ADD EAN-8 DELETE EAN-8 DELETE EAN-13 ADD EAN-13 DELETE I 2 OF 5 ADD I 2 OF 5 DELETE D 2 OF 5 ADD D 2 OF 5 3-52...
  • Page 53 LS 3203ER Product Reference Guide: Parameter Menus Synapse Code Type ADD CODE 128 DELETE CODE 128 ADD MSI/Plessey DELETE MSI/Plessey ADD CODE 93 DELETE CODE 93 ADD EAN 128 DELETE EAN 128 3-53...

  • Page 54: Code 2 Of 5 Lengths

    LS 3203ER Product Reference Guide: Parameter Menus Synapse Code 2 of 5 Lengths To set the lengths for each code type: 1. Scan the desired option. 2. Scan two bar codes on page 3-55 for each desired length. For example, for a length of “12”, scan “1”...
  • Page 55 LS 3203ER Product Reference Guide: Parameter Menus Synapse Code 2 of 5 Lengths CANCEL 3-55...

  • Page 56: Decode Options

    LS 3203ER Product Reference Guide: Parameter Menus Synapse Decode Options TRANSMIT UPC-A DO NOT CHECK DIGIT TRANSMIT UPC-A CHECK DIGIT TRANSMIT UPC-E DO NOT CHECK DIGIT TRANSMIT UPC-E CHECK DIGIT CONVERT DO NOT UPC-E TO UPC-A CONVERT UPC-E TO UPC-A 3-56...
  • Page 57 LS 3203ER Product Reference Guide: Parameter Menus Synapse Decode Options DECODE UPC/EAN IGNORE UPC/EAN WITH SUPPLEMENTALS WITH SUPPLEMENTALS ENABLE EAN ZERO EXTEND DISABLE EAN ZERO EXTEND TRANSMIT “NO DECODE” DO NOT TRANSMIT MESSAGE “NO DECODE” MESSAGE 3-57...
  • Page 58 LS 3203ER Product Reference Guide: Parameter Menus Synapse Decode Options ENABLE CLSI EDITING DISABLE CLSI EDITING ENABLE NOTIS EDITING DISABLE NOTIS EDITING ENABLE CODE 39 DISABLE CODE 39 FULL ASCII FULL ASCII VERIFTY CODE 39 DO NOT VERIFY CODE 39 CHECK DIGIT CHECK DIGIT 3-58...
  • Page 59 LS 3203ER Product Reference Guide: Parameter Menus Synapse Decode Options ITF-14/EAN-13 CONVERSION ITF-14/EAN-13 CONVERSION DISABLED ENABLED DO NOT BEEP AFTER GOOD DECODE BEEP AFTER GOOD DECODE BUFFER CODE 39 DO NOT BUFFER CODE 39 3-59...
  • Page 60 LS 3203ER Product Reference Guide: Parameter Menus Synapse Decode Options UPC/EAN SECURITY LEVEL 0 UPC/EAN SECURITY LEVEL 1 UPC/EAN SECURITY LEVEL 3 UPC/EAN SECURITY LEVEL 2 3-60...
  • Page 61 LS 3203ER Product Reference Guide: Parameter Menus Synapse Decode Options ENABLE 1 MSI/Plessey ENABLE 2 MSI/Plessey CHECK DIGIT CHECK DIGITS MSI 2 CHECK DIGITS MSI 2 CHECK DIGITS MOD 10 - MOD 10 MOD 11 - MOD 10 ENABLE CODABAR DISABLE CODABAR DECODE REDUNDANCY DECODE REDUNDANCY...
  • Page 62 LS 3203ER Product Reference Guide: Parameter Menus Synapse UPC-A Preamble Select one option for UPC-A preamble by scanning the appropriate bar code. NONE SYSTEM CHARACTER SYSTEM CHARACTER & COUNTRY CODE 3-62...
  • Page 63 LS 3203ER Product Reference Guide: Parameter Menus Synapse UPC-E Preamble Select one option for UPC-E preamble by scanning the appropriate bar code. NONE SYSTEM CHARACTER SYSTEM CHARACTER & COUNTRY CODE 3-63...
  • Page 64 LS 3203ER Product Reference Guide: Parameter Menus Synapse Data Transmission Formats Scan the option you wish to set. DATA AS IS <PREFIX> <DATA> <DATA> <SUFFIX> <PREFIX> <DATA> <SUFFIX> 3-64...
  • Page 65 LS 3203ER Product Reference Guide: Parameter Menus Synapse Prefix/Suffix Values To set a PREFIX/SUFFIX value: 1. Scan the option bar code you wish to set. 2. Scan three bar codes on the next page which correspond to the ASCII value or keystroke you wish to assign.
  • Page 66 LS 3203ER Product Reference Guide: Parameter Menus Synapse Prefix/Suffix Values CANCEL 3-66...
  • Page 67 LS 3203ER Product Reference Guide: Parameter Menus Synapse Transmit Code ID Character Select whether to enable or disable this parameter. TRANSMIT CODE ID CHARACTER DO NOT TRANSMIT CODE ID CHARACTER 3-67...
  • Page 68 LS 3203ER Product Reference Guide: Parameter Menus Synapse Transmit AIM ID Character Select whether to enable or disable this parameter. TRANSMIT AIM ID CHARACTER DO NOT TRANSMIT AIM ID CHARACTER 3-68...

  • Page 69: Laser On Time-Out

    LS 3203ER Product Reference Guide: Parameter Menus Synapse Laser On Time-out To select a laser on time-out, scan the bar code below or on the next page corresponding to the desired time. 0.5 SECONDS 1.0 SECONDS 2.0 SECONDS 1.5 SECONDS 3.0 SECONDS 2.5 SECONDS 3-69...
  • Page 70 LS 3203ER Product Reference Guide: Parameter Menus Synapse Laser On Time-out 3.5 SECONDS 4.0 SECONDS 4.5 SECONDS 5.0 SECONDS 3-70...

  • Page 71: Power Mode

    LS 3203ER Product Reference Guide: Parameter Menus Synapse Power Mode Select whether the laser remains on continuously, or turns off after a decode attempt (Low Power). CONTINUOUS ON LOW POWER 3-71...

Table of Contents