Table of Contents
Advertisement
Introduction
This chapter includes bar codes to customize how data is transmitted to the host device. Also see each host chapter for the
appropriate host connections and host device features for the scanner. See
Formatting
for customizing data for transmission to the host device.
Before programming, follow the instructions in
The scanner is shipped with the settings shown in the
A, Standard Default Parameters
programming is not necessary. Set feature values by scanning single bar codes or short bar code sequences.
Scanning Sequence Examples
In most cases, scan only one bar code to set a parameter value. Other parameters, such as Prefix Value, require scanning several
bar codes in sequence. See the parameter description for this procedure.
Errors While Scanning
Unless otherwise specified, if an error is made during a scanning sequence, re-scan the correct parameter.
Miscellaneous Default Parameters
Table 13-1
lists the defaults for miscellaneous scanner options parameters. To change an option, scan the appropriate bar code(s) in
this chapter.
See
Appendix A, Standard Default Parameters
default parameters.
Miscellaneous Scanner Options
Transmit Code ID Character
Scan Angle
Prefix Value
Suffix Value
Scan Data Transmission Format
FN1 Substitution Values
Transmit "No Read" Message
Synapse Interface
Chapter 1, Getting
Miscellaneous Scanner Options Default Table on page 13-3
for all host device and miscellaneous scanner defaults). If the default values suit requirements,
for all user preference, host, symbology, and miscellaneous
Table 13-1. Miscellaneous Scanner Options Default Table
Parameter
Chapter 12, Symbologies
Started.
Default
None
Normal Angle
7013 <CR><LF>
7013 <CR><LF>
Data As Is
Set FN1 Substitution Value
Disable No Read
Standard Synapse
Connection
Miscellaneous Scanner Options 13-3
and
Chapter 14, Advanced Data
(also see
Appendix
Page Number
13-4
13-4
13-5
13-5
13-6
13-8
13-8
13-9
- Quick Links:
- Pairing
Hide quick links:
Advertisement
Table of Contents
