Message Containing A Specific Data String - Symbol LS3478-FZ Reference Manual

Message Containing A Specific Data String

Use this feature to select whether the formatting affects data that begins with a specific character or data string, or contains a
specific character or data string.
There are 4 features:
• Specific String at Start
• Specific String, Any Location
• Any Message OK
• Rule Belongs to Set
Specific String at Start
Scan this bar code, then scan the bar codes representing the desired character or characters (up to a total of 8) in the
Keyboard on page 14-77.
After scanning the following bar code:
1. Enter a string using the
2. Scan End of Message
Specific String, Any Location
Scan this bar code, then, using the
"zero" if necessary). Then scan the desired character or characters (up to a total of 8) on the
followed by the End of Message
After scanning the following bar code:
1. Enter a location using the
2. Enter a string using the
3. Scan End of Message
Any Message OK
By not scanning any bar code, all selected code types are formatted, regardless of information contained.
Alphanumeric Keyboard beginning on
on page 14-85.
Specific String At Start
Numeric Keypad on page 14-18, scan a two-digit number representing the position (use a leading
bar code on page 14-85.
"Numeric Keypad" on page
Alphanumeric Keyboard beginning on
on page 14-85.
Specific String Any Location
page 14-77.
Alphanumeric Keyboard on page
18.
page 14-77.
Advanced Data Formatting 14-17
Alphanumeric
14-77,