Changing The Units - KERN ABS Operating Instruction

6.4

Changing the units

The basic weight unit is the unit used by the balance for weighing after being turned on.
Menu call
FUnC.SEL CAL
trC:on
band:1
Unit.SEL
Use the CAL/MENU key to select the desired weight unit. Press the TARE/
check the new set-up. The standby indicator will appear.
The standby indicator will appear in the case of all selected units.
The actual change in standby units in the weighing mode occurs when the
UNIT/ key is pressed. The selected units appear here.
ABS/ABJ-BA-e-1019
U- g grams
(0.0001 g)
U- mg Milligrams
(0.1 mg)
U- % Percentage
U- PCS Parts
....... for more units, see the menu
key to
-
31