Taring; Simple Weighing (Weight Measurement); Unit Change-Over; Data Interface - KERN ABS Operating Instruction

2.5.4 Taring

2.5.5 Simple weighing (weight measurement)

2.5.6 Unit change-over

2.6

Data interface

ABS/ABJ-BA-e-1019
Accurate weighing is only possible if the display indicated
0.0000 g before the objects were weighed. Press the
TARE/ key to zero the weight display. Taring can be
done over the entire weight range of the balance.
Place the item to be weighed on the plate. Read the weight
when the standby symbol appears on the display.
The units set in the balance operation menu can be called
up by pressing the UNIT/
The interface connection is located at the rear of the
balance.
Note!
Unplug the balance from the power outlet before connecting
or removing additional devices (printer, PC) from the data
interface.
To output data, press the PRINT/
Refer to the "Description of interface" chapter for more
information on the data interface.
key.
key.
13