Electrolux E23CS75DSS0 Service Manual page 94

94
Section F - Ice Maker
6
7
Ice Maker connected to electricity.
Mold temperature above 9
6
Thermostat closed.
• Ice Maker connected to electricity.
Motor starts to rotate as ice brakes loose.
• Mold temperature above 9°F.
Mold Heating.
Ice Maker connected to electricity.
• Thermostat closed.
Control Arm is down.
Mold temperature above 9
6
• Motor starts to rotate as ice breaks loose.
Feeler Arm Switch closed C to NO.
Thermostat closed.
• Mold heating.
Hold Switch closed C to NO.
Motor starts to rotate as ice brakes loose.
• Control Arm is down.
Water Fill Switch closed but shorted out by thermostat.
Mold Heating.
• Feeler Arm Switch closed C to NO.
Control Arm is down.
• Hold Switch closed C to NO.
Feeler Arm Switch closed C to NO.
• Water Fill Switch closed but shorted open by thermostat.
Hold Switch closed C to NO.
Water Fill Switch closed but shorted out by thermostat.
• Ice Maker connected to electricity.
• Mold temperature above 9°F.
Ice Maker connected to electricity.
• Thermostat closed.
7
Mold temperature above 9
• Motor is rotating.
Thermostat closed.
• Mold heating.
Motor is rotating.
• Control Arm is down.
Mold Heating.
Ice Maker connected to electricity.
• Feeler Arm Switch closed C to NO.
7
Control Arm is down.
Mold temperature above 9
• Hold Switch closed C to NC.
Feeler Arm Switch closed C to NO.
Thermostat closed.
• Water Fill Switch open.
Hold Switch closed C to NC.
Motor is rotating.
Water Fill Switch open.
Mold Heating.
Control Arm is down.
Feeler Arm Switch closed C to NO.
Hold Switch closed C to NC.
Water Fill Switch open.
F.
F.
F.
F.