Iq-Touch - Electrolux E23CS75DSS0 Service Manual

46
Section C - Electronic Control System

IQ-Touch

Your refrigerator is equipped with a Glass Touch
Panel user interface display. It is only necessary
to touch the glass. There is no need to press with
force. There are three dispenser modes:
1 Water
2 Ice Cubes
3
Crushed Ice
A red indicator light will be illuminated above the active mode.
Touch the icon to activate the options below.
Any of the following options that are activated have
a red indicator light above the icon.
fast ice
fast freeze
dispenser light
control lock
vacation mode
water filter
air filter
temp display
mute sounds
factory default
on off
TM
(some models)
Increases the production of ice
Activates a faster rate for freezing food
On / Off
Press and hold for three seconds to activate
and deactivate. This restricts undesired
changes to the refrigerators settings and
prevents use of the ice and water dispenser.
Conserves energy by increasing the time
between automatic defrost. It is automatically
deactivated by opening the refrigerator door after
24 hours. This feature is automatically activated
during long periods between door openings.
Vacation mode is manually activated when the red
indicator is lit.
Touch to display filter condition status.
Press and hold for three seconds to reset.
Touch to display filter status. Press and
hold for three seconds to reset.
Touch to toggle the freezer and fridge
temps display on and off.
Touch and hold temp display to toggle
display from Fahrenheit to Celsius.
Tones emitted by each keypress can be
turned off based on user preference. The
sounds are muted when the red indicator is
lit. Warning signals will stay active.
Resets all refrigerator settings such as
temp, temp display and ring tones to their
factory default settings.
Press and hold for three seconds to turn off
the cooling system to clean the refrigera-
tor. It also turns off all dispenser functions.
The temperature display will read OFF.
IMPORTANT
Pressing the system off icon does not turn off
power to your refrigerator. You must unplug the
power cord from the wall outlet.
Setting cooling temperatures
1 Touch the glass panel to illuminate the
display to the Plus (+) and minus (-)
indicators which appear on either side of the
displayed temperatures.
2 Press the + or – indicator to adjust the
temperature to the desired setting.
The temperature display will begin to blink
with the first touch. The display times out after
5 seconds and returns to the basic display.
Alarms
Door Ajar If the door has been left open for an
extended period of time, an alarm will
sound and the door ajar indicator will
display in the middle of the display. The
alarm is turned off by closing the door. The
mute sounds key will illuminate to prompt
the reset of any pending alarms. Press this
key to reset any system alarms.
High Temp In the event of a high temperature condi-
tion, the temperature display will display
"HI,". After 20 minutes and the high temp
alert will be displayed and the alarm off
icon will illuminate until pressed, acknowl-
edging the alarm, at which time the highest
temperature reached will be displayed and
the refrigerator will resume normal opera-
tion. All other modes are turned off until the
alarm is acknowledged.
Power Fail In the event of a power failure, the power
fail alert will be displayed and the mute
sounds icon will illuminate until the mute
sounds icon is pressed, acknowledging the
alarm. Other modes may be turned off until
the alarm is acknowledged. The power fail
alert is turned off and the refrigerator will
resume normal operation. The high temp
alarm may also be illuminated until a safe
operating range temperature has been
reached.