To Remove Crusher Blades; Ice Ad Water Dispenser Assembly; Seven Selection Dispenser; Gaining Access - Electrolux E23CS75DSS0 Service Manual

104
Section G - Ice and Water Dispenser
To replace Crusher Blades:
1. Remove Auger Nut to gain access to Crusher
Blades. Each blade is separated by Spacer.
(See Figure G6)
2. Remove Crusher Blades and Spacers until
you get to one that needs replacement.
3. Replace assembly in reverse order.
Figure G6
Ice and Water Dispenser
Assembly
Feature Levels
The ice and water dispenser has one actuators for
both water and ice. (See Figure 1)
Figure 1
The feature layout used on the ice and water side
by sides will be a Seven Selector Dispenser.
Seven Selection Dispenser: (See Figure
2)
1. Fast Ice - Press to increase ice production for
a period of 12 hours
2. Fast Freeze - Press to drop freezer temp to
-6 F for a period of 16 hours.
3. Water - Press to get water out of dispenser
4. Cubed - Press to get cubed ice.
5. Crushed - Press to get crushed ice.
6. Light - Press to turn on light in dispenser.
7. Lock - Press to disable dispenser.
(Child Lock)
1 2 3
Figure 2

Gaining Access

To service the control board you must remove the
frame around the dispenser housing by pulling
straight out at the top corner and working your way
around the frame pulling it out of the grove in the
door. (See Figure 7)
Figure 3
4 5 6 7