Outback Modern Classic Trooper Assembly And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Outback Manuals
  4. Grill
  5. Modern Classic Trooper
  6. Assembly and operating instructions manual

Outback Modern Classic Trooper Assembly And Operating Instructions Manual

Hide thumbs Also See for Modern Classic Trooper:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Assembly and Operating Instructions Manual
Assembly and Operating Instructions for Outback®
Modern Classic Trooper and Outback® Modern Classic Hunter Gas Barbecues
Photographs are not to scale.
Specifications subject to change
without prior notice.
•
For outdoor use only.
•
Read instructions before using the appliance. Failure to follow instructions could
result in death, serious bodily injury, and/or property loss.
•
Warning: accessible parts may be very hot. Keep young children away.
•
Do not move the appliance during use.
•
Turn off the gas supply at the gas bottle after use.
•
Any modification of the appliance, misuse, or failure to follow the instructions may be
dangerous and will invalidate your warranty. This does not affect your statutory rights.
•
WARNING
Retain these instructions for future reference.
•
Leak test your barbecue annually. Check the hose connections are tight and leak test
each time you reconnect the gas bottle.
FOR YOUR SAFETY
If you smell gas:
1.
Shut off gas to the appliance.
2.
Extinguish any open flame.
3.
Open barbecue lid or hood.
4.
If odour continues, discontinue use and
contact your local dealer.
Gas Barbecues
FOR YOUR SAFETY
1.
Do not store or use petrol or other flammable
vapours or liquids in the vicinity of this or any
other appliance.
2.
A gas bottle not connected for use shall not be
stored in the vicinity of this or any other
appliance.
0359

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Modern Classic Trooper and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Outback Modern Classic Trooper

Summary of Contents for Outback Modern Classic Trooper

  • Page 1 Gas Barbecues Assembly and Operating Instructions for Outback® Modern Classic Trooper and Outback® Modern Classic Hunter Gas Barbecues Photographs are not to scale. Specifications subject to change 0359 without prior notice. • For outdoor use only. • Read instructions before using the appliance. Failure to follow instructions could result in death, serious bodily injury, and/or property loss.

  • Page 2: Parts List

    A. Parts List Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see ‘Hardware Reference Diagram’. Outback® Modern Outback® Modern CODE PART Classic Trooper Classic Hunter Hood (Pre-Assembled to Body)

  • Page 3: Parts Diagrams

    B. Parts Diagrams Quantities vary according to model purchased. Specifications subject to change without prior notice. For more details on hardware, please see hardware pack page.
  • Page 4 C. Hardware Reference Diagram Specifications subject to change without prior notice. D3, D4...
  • Page 5 D. Assembly TOOLS NEEDED ASSEMBLY: Medium size flat blade or Phillips/crosspoint screwdriver, adjustable spanner or metric spanner set The assembly of this barbecue requires 2 people Whilst every care is taken in the manufacture of this product, care must be taken during assembly in case sharp edges are present.
  • Page 6 Turn the trolley over so that it stands on its side shelves. Slide the axle (C9) through the corresponding holes in the short legs (C2,C3). Place a washer (D5) on each end of the axle. Slide the wheels (C10) over each end of the axle. Secure the wheels into place with the locknuts (D6).
  • Page 7 Lay the assembled trolley on its side. Lay the body (B6) on its back and slide into position between the trolley legs. Warning: Care must be taken to ensure hood does not fall open unexpectedly. When positioning the body of the barbecue, ensure the control panel is on the same side as the legs with Velcro fastenings.
  • Page 8 Remove the plastic wrap from the lava rock & basket (B4, B5) and lay them carefully into the body ensuring it lies level within the body. Lay the cooking grill(B1, B2) and griddle (B3) into place. 2 burner model configuration: Left — Large Cooking Grill, Right — Small Cooking Grill, 3 burner model configuration: Left —...
  • Page 9 (Rear view of the barbecue trolley.) Attach the screen (C6) to the front left/right Attach the warming rack (A10) to the legs as shown. hood as shown. Connect the gas hose (B12) to the BBQ. Ensure the mating faces of the connection are clean and not damaged.

  • Page 10: Installation

    Propane Minimum the horizontal position. A leak would be very Bottle Size Bottle Size serious and liquid could enter the gas line. Outback® 15kg Open the barbecue lid before lighting. The Trooper barbecue should never be lit or used while the lid is closed.

  • Page 11: Operation

    level ground next to the barbecue and safely away H2. Preparation Before Cooking from any source of heat. Should you need to Line the drip tray with aluminium foil and fill the change the gas bottle, confirm that the barbecue is drip tray with dry sand.
  • Page 12 produced during cooking fall onto the lava rocks balanced so that the rotisserie can rotate and vaporise to form smoke. The smoke then rises freely without interference from any barbecue and ‘bastes’ the food, giving it that unique surfaces. Any loose sections of meat should barbecued flavour.

  • Page 13: Care And Maintenance

    Replacement lava there are no signs of blockage (fat, debris or rock is available from your local Outback® insects for example), in either the burner portholes stockist.

  • Page 14: Technical Specifications

    I5. Barbecue Body Burners Approval Input Size Pressure Regularly remove excess grease or fat from the barbecue body with a soft plastic or wooden Outback® Modern 0359 scraper. It is not necessary to remove all the 7.87kW Butane/28 Classic 359AS128 grease from the body.

  • Page 15: Troubleshooting

    K. Troubleshooting Problem Possible Cause Solution Burners will not light using the LP gas cylinder is empty Replace with full cylinder ignition system Faulty regulator Have regulator checked or replace Obstructions in burners Clean burners Obstructions in gas jets or gas hose Clean jets and gas hose Electrode wire is loose or disconnected on Reconnect wire...
  • Page 16 (10) years from the date of purchase. Stainless steel burners are warranted for a period of two (2) years from the date of purchase. OUTBACK UK will, within this period, supply replacements for defective parts free of charge provided that: ♦...

This manual is also suitable for:

Modern classic hunter

Table of Contents