Copyrights - Bosch VIDEOJET multi 4000 Installation Manual

26 en | Troubleshooting
The serial interface supports the RS-232, RS-422 and RS-485 transmission standards. The
mode used depends on the current configuration.
The pin assignment of the serial interface depends on the interface mode used:
Contact
CTS
TXD
RTS
RXD
GND
Pin assignment I/O
Contact
IN1
IN2
IN3
IN4
GND
R
Connect each alarm input to a ground contact (GND).
7.8

Copyrights

Fonts
The firmware uses the fonts "Adobe-Helvetica-Bold-R-Normal--24-240-75-75-P-138-ISO10646-1"
and "Adobe-Helvetica-Bold-R-Normal--12-120-75-75-P-70-ISO10646-1" under the following
copyright:
Copyright 1984-1989, 1994 Adobe Systems Incorporated.
Copyright 1988, 1994 Digital Equipment Corporation.
Permission to use, copy, modify, distribute and sell this software and its documentation for
any purpose and without fee is hereby granted, provided that the above copyright notices
appear in all copies and that both those copyright notices and this permission notice appear
in supporting documentation, and that the names of Adobe Systems and Digital Equipment
Corporation not be used in advertising or publicity pertaining to distribution of the software
without specific, written prior permission.
Software
This software is based in part on the work of the Independent JPEG Group.
Audio
AAC audio technology licensed by Fraunhofer IIS (http://www.iis.fraunhofer.de/amm/).
2014.02 | V1 | F.01U.298.750
RS-232 mode
—
TxD (transmit data)
—
RxD (receive data)
GND (ground)
Function
Input alarm 1
Input alarm 2
Input alarm 3
Input alarm 4
Ground
Relay output
Installation Manual
RS-422 mode
RxD- (receive data minus)
TxD- (transmit data minus)
TxD+ (transmit data plus)
RxD+ (receive data plus)
—
VIDEOJET multi 4000
RS-485 mode
—
Data-
Data+
—
—
Bosch Sicherheitssysteme GmbH