Maintenance And Repair - Bosch VIDEOJET multi 4000 Installation Manual

6 en | Safety
–
–
–
1.3

Maintenance and repair

–
–
2014.02 | V1 | F.01U.298.750
When making connections, use only the cables supplied or use appropriate cables
immune to electromagnetic interference.
Position and run all cables so that they are protected from damage, and provide adequate
cable strain relief where needed.
When installing in a switch cabinet, ensure that the screw joints are free of tension and
subject to as little mechanical stress as possible. Ensure that the unit has sufficient
grounding.
Never open the housing of the unit. The unit does not contain any user-serviceable parts.
Ensure that all maintenance or repair work is carried out only by qualified personnel
(electrical engineers or network technology specialists). In case of doubt, contact your
dealer's technical service center.
Installation Manual
VIDEOJET multi 4000
Bosch Sicherheitssysteme GmbH