Chevrolet Cruze Owner's Manual page 164

160 Infotainment system
Pairing a Bluetooth device
Important information
The pairing process is disabled
n
when the vehicle is moving.
Up to five devices can be paired to
n
the system.
The Infotainment system automa-
n
tically connects to the first device in
the list of currently paired devices.
Only one paired device can be
n
connected to the Infotainment
system at a time.
Pairing normally only needs to be
n
carried out once, unless changes to
the pairing information have been
made or the device is deleted.
Performing pairing
Select Connect to new device.
The Infotainment system asks a series
of questions to determine what type of
Bluetooth device is being paired.
After determination is performed, the
Bluetooth device needs to be put into
discovery mode (see user guide of
Bluetooth device).
Some Bluetooth devices may require a
PIN code in order to complete the
pairing process. Locate the device
named GMusicConnect in the list on
the Bluetooth device and follow the
instructions on the device to enter the
PIN code provided by the Infotainment
system.
Connecting a paired device
Select Select device.
A list of all Bluetooth devices currently
paired to the Infotainment system is
displayed.
Select the desired device. The device is
connected to the Infotainment system.
If another Bluetooth device is currently
connected to the Infotainment system
this device is disconnected from the
system.
Removing a paired device
Select Remove device.
A list of all Bluetooth devices currently
paired to the Infotainment system is
displayed.
Select the desired device. The device is
removed from the list of paired devices.
Changing the default PIN
Select Change default PIN.
Select one of the pre-defined PIN
codes, or select Other to create a new
PIN.