Chevrolet Cruze Owner's Manual page 125

2. Unscrew both screws.
3. Remove tail light assembly. Take
care that the cable duct remains in
position.
4. Reverse light (1)
Turn signal light (2)
Tail light/brake light (3)
5. Rotate bulb holder anti-clockwise.
Vehicle care
6. Remove bulb holder. Push bulb into
socket slightly, rotate anticlockwise,
remove and renew bulb.
7. Insert bulb holder into the tail light
assembly and screw into place.
Connect wiring plug. Install tail
light assembly in body and tighten
screws. Close covers and engage.
8. Switch on ignition, operate and
check all lights.
121