Chevrolet Cruze Owner's Manual page 104

100 Driving and operating
No automatic shifting to a higher gear
takes place at high engine revolutions.
When shift change in automatic trans-
mission, it could not be smooth. But, it
is not a problem with automatic trans-
mission. If Transmission control mod-
ule (TCM) shift pattern learn is done by
shift up/down several times, it would
lead smooth shift change.
ELECTRONIC DRIVING
PROGRAMMES
n Following a cold start, the operating
temperature programme increases
engine speed to quickly bring the
catalytic converter to the required
temperature.
The automatic neutral shift function
n
automatically shifts to idling when
the vehicle is stopped with a for-
ward gear engaged.
Kickdown
For faster acceleration press and hold
the accelerator pedal all the way down.
The transmission then shifts to a lower
gear depending on engine speed.
FAULT
In the event of a fault, malfunction indi-
cator light illuminates. The trans-
mission no longer shifts automatically
nor manually because it is locked in a
certain gear.
Have the cause of the fault remedied by
a CHEVROLET retailer.
INTERRUPTION OF POWER
SUPPLY
In the event of an interruption of power
supply, the selector lever cannot be
moved out of the P position. The
ignition key cannot be moved out of the
ignition lock.
If the battery is discharged, start the
vehicle using jump leads
If the battery is not the cause of the
fault, release selector lever and remove
ignition key from ignition lock.
Release selector lever
1. Apply parking brake.
134.