Chevrolet Cruze Owner's Manual page 137

4. Set the jack to the necessary height.
Position it directly below the jack-
ing point in a manner that prevents
it from slipping.
Attach wheel wrench and with the
jack correctly aligned, rotate wheel
wrench until wheel is clear of the
ground.
5. Unscrew the wheel nuts.
6. Change the wheel.
7. Screw on the wheel nuts.
8. Lower vehicle.
9. Install the wheel wrench ensuring
that it locates securely and tighten
each nut in a crosswise sequence.
Tightening torque is 140 Nm.
10. Align the valve hole in the wheel
cover (if equipped) with the tyre
valve before installing.
Install wheel nut caps.
11. Stow the replaced wheel
the vehicle tools 128.
12. Check the tyre pressure of the
installed tyre and also the wheel nut
torque as soon as possible.
Have the defective tyre renewed or
repaired.
SPARE WHEEL
The spare wheel can be classified as a
temporary spare wheel depending on
the size compared to the other mounted
wheels and country regulations.
Use of a spare wheel that is smaller
than the other wheels or in combina-
tion with winter tyres could affect
driveability. Have the defective tyre
replaced as soon as possible.
133 and
Vehicle care 133
Caution