Chevrolet Cruze Owner's Manual page 127

3. Remove bulb holder. Push bulb into
socket slightly, rotate anticlockwise,
remove and renew bulb.
4. Insert bulb holder into boot lid. Refit
the inner panelling to boot lid.
5. Switch on ignition, operate and
check the lights.
INTERIOR LIGHTS
Courtesy light, Reading lights
Have bulbs replaced by a CHEVROLET
retailer.
Load compartment light
1. Prise the lamp out with a
screwdriver.
Vehicle care
2. Press bulb slightly towards spring
clip and remove.
3. Insert new bulb.
4. Install lamp.
123