Towing - Chevrolet Cruze Owner's Manual

Lead connection order:
1. Connect the red lead to the positive
terminal of the booster battery.
2. Connect the other end of the red
lead to the positive terminal of the
discharged battery.
3. Connect the black lead to the
negative terminal of the booster
battery.
4. Connect the other end of the black
lead to a vehicle grounding point,
such as the engine block or an
engine mounting bolt. Connect as
far away from the discharged
battery as possible, however at least
60 cm.
Route the leads so that they cannot
catch on rotating parts in the engine
compartment.
To start the engine:
1. Start the engine of the vehicle
providing the jump.
2. After 5 minutes, start the other
engine. Start attempts should be
made for no longer than 15 seconds
at an interval of 1 minute.
3. Allow both engines to idle for
approx. 3 minutes with the leads
connected.
4. Switch on electrical consumers(e.g.
headlights, heated rear window) of
the vehicle receiving the jump start.
5. Reverse above sequence exactly
when removing leads.
Vehicle care

TOWING

TOWING THE VEHICLE
If you need to have your vehicle towed,
please use our service network or
professional towing company.
The best method is to have the vehicle
transported using a recovery vehicle.
135