Vehicle Checks - Chevrolet Cruze Owner's Manual

110 Vehicle care
n Disconnect the clamp from the nega-
tive terminal of the vehicle battery.
Beware that all systems are not func-
tional, e.g. anti-theft alarm system.
Putting back into operation
When the vehicle is to be put back into
operation:
Connect the clamp to the negative
n
terminal of the vehicle battery.
Activate the electronic of the power
windows.
Check tyre pressure.
n
Fill up the washer fluid reservoir.
n
Check the engine oil level.
n
n Check the coolant level.
Fit the number plate if necessary.
n
RADIO FREQUENCY
IDENTIFICATION (RFID) TAG *
This vehicle is equipped with Radio
Frequency Identification (RFID) tag*,
which can be used for Electronic Toll
Collection (ETC) or any other applica-
tions as decided by the Regulatory
authority. The RFID tag is located on
inside the windshield. Data for necessary
applications will be added by the agency
authorized by the Regulatory authority,
from time to time. Take proper care
during washing or cleaning of windshield
so as to avoid any damage to the RFID
tag. In case of any damage or malfunction
of RFID tag, or in case of windshield
replacement, contact your CHEVROLET
retailer or agency authorized by the
Regulatory authority for the installation
of new RFID tag.
Caution
Do not touch or peel off. Do not place
any sticker or other metallic components
over the RFID tag neither from inside
nor from outside of the windshield.
Avoid exposure to chemicals or liquid
solvents. This will impair the function of
RFID tag. The RFID tag is tamperproof
and will not function once removed
from windshield.

VEHICLE CHECKS

PERFORMING WORK
Warning
Only perform engine compartment
checks when the ignition is off.
The cooling fan may start operating
even if the ignition is off.