Programming Powder Quantity; Programming Coffee Temperature; Programming Water Quantity; Programming Steam Portion - Jura IMPRESSA 601 Instructions For Use Manual

13.1 Programming powder quantity

Switch the machine on by pressing ON/OFF key
Press key until you can hear an acoustic signal.
P
POWDER QUANTITY / SELECT KEY
Now press the key that you want to programme. Use the key for
1 cup only. The corresponding quantity for 2 cups is adjusted
automatically by the machine after programming is finished.
POWDER
·········· II ··········
-
The powder quantity can be selected by pressing keys
briefly.
To store the new powder quantity in memory briefly press key
POWDER QUANTITY / SELECT KEY.
By pressing the + button, you can select the next phase, or
press the button in order to leave the programming.
N

13.2 Programming coffee temperature

TEMPERATURE COFFEE / SELECT KEY
Now press the key that you want to programme.
Select the required temperature (high or normal) by activating
key + or .
-
To store the new coffee temperature in memory briefly press key
.
P
TEMPERATURE COFFEE / SELECT KEY
By pressing the + button, you can select the next phase, or
press the button in order to leave the programming.
N

13.3 Programming water quantity

WATER QUANTITY / SELECT KEY
Put a cup under the coffee-spout (15) and then press the key that
you want to programme.
.
+
+ or
-
P
The selected value is confirmed
Now your machine prepares a coffee.
ENOUGH COFFEE? / PRESS KEY
OK?
-
P
When the required water quantity is reached press key
can call up the next setting by pressing key
There is an additional possibility to alter the water quantity
anew. Press key + or
If you wish to draw another coffee to control the water quantity,
press key again otherwise press key
quantity in memory.
By pressing the + button, you can select the next phase, or
.
press the button in order to leave the programming.
N

13.4 Programming steam portion

STEAM PORTION
Press key .
P
PORTION /....20 SEC.
By pressing key or
+
(drawing off time of 3 – 250 sec.)
Press key .
P
STEAM PORTION
By pressing the + button, you can select the next phase, or
press the button in order to leave the programming.
N

13.5 Programming tea portion

Place a cup under the height-adjustable tea-spout (22).
Press key .
P
OPEN TAP
ENOUGH TEA? / CLOSE TAP
TEA PORTION
P
·········· II ·········· +
.
+
for this purpose.
-
briefly to store water
P
you can programme time in seconds
-
. You
P
E
13