Page 1
IMPRESSA X90/X95 Instructions for use 3/03...
Page 2
English ......................6 – 22 Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. Jura Elektroapparate AG, CH-4626 Niederbuchsiten, = Note = Important = Tip Internet http://www.juraworld.com...
Page 5
Instructions for use 1 Drip tray / residual water container 2 Drip tray cover 3 Cover for programming keys 4 Coffee key for 2 large cups 5 Coffee key for 1 large cup 6 Coffee key for 2 small cups 7 Coffee key for 1 small cup 8 Key for special coffee 9 ON/OFF switch...
Been Always remove plug from power socket before cleaning. refined and further developed by Jura, the Intelligent Pre Brew When removing plug from power socket, never tug on the cord Aroma System (I.P.B.A.S „) ensures full coffee aroma.
Switch your machine on by pressing ON/OFF key . The of your Jura coffee machine is not suitable for coffee beans machine adjusts fully-automatically to the starting position. which were treated, during or after roasting, with additives PLEASE WAIT (e.g.
Place a container under the coffee-spout (15) and press rinsing The machine has got 5 hardness settings to choose from. While adjusting, the chosen grade is shown on the display. UNIT RINSING The symbols on the display mean: COFFEE READY HARDNESS LEVEL—: water hardness function is switched off...
7. Use of Claris filter cartridges The water might be slightly discoloured (this is not damag- ing to the health). Under proper implementation of Claris filter cartridges, decalcifying of the machine becomes unnecessary. For 7.2 Replacing of filter further information, please read the brochure “Claris. Tough to calcium deposits, gentle to your coffee machine“.
UNIT RINSING 9. Drawing off hot water COFFEE READY Put a cup under the height-adjustable coffee spout (22) and turn selector switch for hot water (19) to the symbol . The machine Put 1, respectively 2 cups under the coffee-spout and press the will now deliver hot water.
(Fig. 11 and Fig. 12). 11.1 Drawing off cappuccino and hot milk with For proper cleaning, use the Jura Auto Cappuccino Cleaning Profi-Auto-Cappuccino/Caffè Latte Agent which is available at your authorized dealer.
To store the new powder quantity in memory briefly press key 13. Programming POWDER QUANTITY / SELECT KEY. Before leaving our factory, the machine is adjusted to enable you to obtain coffee without any additional programming. In order to By pressing the button, you can select the next phase, or adapt the result to your personal taste, various settings can be pro- press the...
By pressing the button, you can select the next phase, or 13.7 Programming water hardness press the button in order to leave the programming. (only with setting Filter no) HARDNESS LEVEL 3 13.4 Programming steam portion Press key STEAM PORTION By pressing key briefly you can programme the water Press key...
ECONOMY MODE OFF means that the stand-by-status for steam To switch off the automatic timer proceed as follows: is set to 20 minutes and the heating for the cup warming tray is on. Press key After 10 minutes the warning lamp goes out. By pressing the steam Press key key anew, the machine returns to stand-by-status for drawing off UNIT ON —:—...
14.3 Empty drip tray 13.14 Program key EMPTY TRAY By using key you can set back the following settings (powder quantity, coffee temperature, water quantity, steam portion, tea If this message shows on the display no more coffee can be portion) to their original standard settings.
The machine has an integrated cleaning program. The procedure fastenings in groove (B) as well with a brush (Fig. 8). lasts about 15 minutes. Please use Jura cleaning tablets only. These are available from your 14.9 General cleaning instructions Jura dealer.
Your machine has an integrated decalcifying program. It lasts approx. 50 minutes. UNIT DECALCIFYING / PLEASE WAIT Please use Jura decalcifying tablets only. These are available from your Jura dealer. When an acoustic signal is heard place a container under the height-adjustable tea-spout (22).
FILL WATER 17. Disposal Place a container under the pivoting nozzle (20). For correct disposal, you should return your coffee machine to your dealer, Jura service centre or Jura Elektroapparate AG. OPEN TAP PRESS CALC 18. Tips for a perfect coffee...
19. Messages Cause Action FILL WATER Water tank is empty Top up with water Water level indicator in tank is jammed Empty tank, rinse out, fill up and replace Tank is calcified, water level indicator is stuck Remove tank, decalcify, rinse well, fill up with water and replace FILL BEANS Bean container is empty...
Cause Action CLEAN UNIT You have drawn off coffee 220 times or run Clean as described in chapter 14.6 the rinsing program 180 times Message still displayed, although machine Run cleaning program again; this time do not cleaned add cleaning tablet UNIT CALCED The espresso/coffee machine sector needs Run decalcifying program as described in...
– Clean Profi Auto-Cappuccino/Caffè Latte – as described in chapter 11.2 If the above mentioned problems and/or messages still persist, please contact your dealer or get in touch directly with Jura Elektroapparate 21. Legal information 22. Technical specifications These operating instructions contain all the information necessary...
Need help?
Do you have a question about the IMPRESSA X90 and is the answer not in the manual?
Questions and answers