Programming Automatic Switch On Time; Programming Automatic Switch Off Time; Cup Counter; Programming Language Selection - Jura IMPRESSA 601 Instructions For Use Manual

Jura impressa s90/s95/s9 operating instructions
Hide thumbs Also See for IMPRESSA 601:
Table of Contents

Advertisement

13.10 Programming automatic switch on time

A programming of the timer clock is necessary if an automatic
switch on is needed.
UNIT ON —.—
Press key
.
P
By briefly pressing key
+
or
confirm by pressing key
.
P
By briefly pressing key
+
then confirm by pressing key
By pressing the
+
button, you can select the next phase, or
press the
button in order to leave the programming.
N
To switch off the automatic timer proceed as follows:
Press key
P
Press key
N
UNIT ON —:—

13.11 Programming automatic switch off time

OFF AFTER 5.0 HOURS
Press key
P
By briefly pressing key
+
or
confirm by pressing key
P
By pressing the
+
button, you can select the next phase, or
press the
button in order to leave the programming.
N

13.12 Cup counter

200 SUPPLIED (TOTAL SUPPLIED)
To obtain the information press the required key. The display
will show you the number of times the function has been chosen.
By pressing the
+
button, you can select the next phase, or
press the
button in order to leave the programming.
N
you can set the hours and then
-
or
you can set the minutes and
-
.
P
you can set the hours and then
-
(0.5 to 9.0 hours).
It is not possible to call up hot water and steam supplies.

13.13 Programming language selection

Press key
P
By briefly pressing key
+
and then confirm by pressing key
By pressing the
+
button, you can select the next phase, or
press the
button in order to leave the programming.
N

13.14 Program key

N
By using key
you can set back the following settings (powder
N
quantity, coffee temperature, water quantity, steam portion, tea
portion) to their original standard settings.
COFFEE READY
Press key
until you can hear an acoustic signal.
N
If a mistake occurs while programming one of the above
settings, just press key
N
to its original standard setting.

14. Care and maintenance

14.1 Fill water

FILL WATER
If this message shows on the display no more coffee can be
drawn off. Top up water.
The water tank should be rinsed and filled with fresh water
daily. Only use fresh, cold water. Never top up with milk,
mineral water or any other liquids. You can top up water
without removing tank.
or
-
call up the language desired
.
P
and the chosen setting moves back
E
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents