Do you have a question about the IMPRESSA E40 and is the answer not in the manual?
Questions and answers
Stevan
March 16, 2025
how to decalcificate?
1 comments:
Mr. Anderson
March 16, 2025
To decalcify the Jura IMPRESSA E40, follow these steps:
1. If the descaling symbol flashes, the machine needs descaling. 2. Use only Jura cleaning tablets for descaling. 3. Ensure the water tank is filled. 4. Empty the drip tray if necessary and put it back in. 5. Start the descaling program as indicated in the machine's instructions. 6. The descaling solution will be guided into the drip tray. 7. Follow the on-screen prompts to complete the descaling process.
If a Claris filter cartridge is used, descaling is not required.
Important information for the user Thank you for choosing this Jura product. Please study these instructions carefully before using your new machine for the first time and keep them in a safe place for easy reference in future. Should you require further information or should particular problems occur that are not dealt with in sufficient detail for you in these operating instructions, please contact your local dealer or us for the information you require.
2. Safety instructions 2.1 Warnings Children are unaware of the dangers that electrical machines can represent; for this reason, children should never be left unsuper- vised with electrical machines. This machine should only be used by people who have read these instructions.
Lift up the cover of the bean container (11). Clean out any dirt or foreign objects from the bean container. Pour coffee beans into the bean container and close the cover again. 3.5 Adjusting the grinder You have the possibility of adjusting the grinder to the roast of your coffee.
Pull the plug and the feed wire out of the wire box on the back of the machine. Put the plug in. Do not switch the machine on. Press the draw-off key for about 3 seconds. Now, the symbols light up. Now select the corresponding level with the and press the ON/OFF switch in order to save the setting.
5. Rinsing the machine When the symbol lights up, a rinsing process is demanded. Place an empty cup under the coffee-spout. Press the rinsing maintenance key (4). The rinsing process is automatically ended. If the machine has been switched off and has already cooled down, the rinsing function will be demanded when the machine is switched on.
If the draw-off key is pressed by mistake, the selection can be cancelled by pressing the machine rinses. After each cleaning operation the filler funnel for the 2nd coffee type should be cleaned. 8. Drawing off steam The steam can be used for heating liquids and also for frothing milk for cappuccino.
9.1 Drawing off hot water E45 Install the hot water nozzle to optain perfect water flow. This is included in your Welcome Pack. 10. Switching machine off When the machine is switched off, the rinsing programme is auto- matically started. Therefore, place an empty container under the coffee-spout and press the ON/OFF switch.
11.7 Insert filter Pull up the cartridge holder in the water tank. Pressing gently, put the filter cartridge into the water tank (Fig. 4). Close the cartridge holder until it engages audibly. Fill the water tank with cold fresh tap water and put it back into the machine.
11.10 Empty system This procedure is necessary in order to protect the machine from damage by frost in transport. Switch the machine OFF with the ON/OFF Place a vessel under the pivoting nozzle for hot water/steam (13). Turn the selector switch for hot water/steam (12) to position Switch your machine back on again with the ON/OFF switch.
13. Descalcifying The machine has an integrated de-scaling programme. If you use a Claris filter cartridge, your machine does not need de-scaling. Only use Jura cleaning tablets. They are available from your Jura dealer. If the machine needs de-scaling, the You can continue to draw off coffee and hot water/steam and then run the de-scaling programme later.
14. Disposal For correct disposal, you should return your coffee machine to your dealer, your Jura service centre or the firm of Jura. 15. Tips for perfect coffee Height-adjustable coffee-spout You can adjust the coffee-spout to the size of your cups Grinding See point 3.5 Pre-warming cups...
16. Messages Display Cause – System empty – System too hot after drawing off steam – Wrong position of selector switch – General troubles – Machine needs rinsing – The tank is empty – Floater defective – Grounds container full –...
Display Cause – Drip tray not inserted properly or missing flash – Cleaning necessary flash – De-scaling necessary flash – Replacing of filter flash 17. Problems Problem Cause Coffee flow is stopped – bean container empty after pre-brewing – not enough coffee powder Grinder is very noisy –...
Problem Cause Not enough froth when – frothing aid blocked frothing milk – frothing aid in wrong position If the above mentioned messages and/or problems still exist, please contact your dealer or get in touch directly with Jura Elektroapparate 18. Legal information These operating instructions contain the information necessary for the correct use, operation and maintenance of the machine.
Need help?
Do you have a question about the IMPRESSA E40 and is the answer not in the manual?
Questions and answers
how to decalcificate?
To decalcify the Jura IMPRESSA E40, follow these steps:
1. If the descaling symbol flashes, the machine needs descaling.
2. Use only Jura cleaning tablets for descaling.
3. Ensure the water tank is filled.
4. Empty the drip tray if necessary and put it back in.
5. Start the descaling program as indicated in the machine's instructions.
6. The descaling solution will be guided into the drip tray.
7. Follow the on-screen prompts to complete the descaling process.
If a Claris filter cartridge is used, descaling is not required.
This answer is automatically generated